Kosti Kannas | 2020-08-28 09:19:21

Welcome to the Post-CMM era!

This is part 4 of our blog series about Mapvision Absolute Measurement (if you missed the previous posts, you can find them here: Mapvision Quality Gate Goes Absolute, Verifying the results and Programming Mapvision Quality Gate with CAD ...

Read Article
Saper Sahbaz | 2020-07-14 10:26:00

8 Frequently Asked Questions You Should Know About Mapvision Quality Gate

Choosing a quality inspection system is not an easy task. From system accuracy to system flexibility, from inspection cycle time to feature count, and from initial investment required to overall return on investment and capabilities gained; ...

Read Article
Kosti Kannas | 2020-07-03 12:55:49

Programming Mapvision Quality Gate with CAD referencing

We continue our blog series about Absolute Measurement a.k.a. CAD referencing or CAD programming. You can read the earlier posts from this same blog: Mapvision Quality Gate Goes Absolute and Absolute Measurement, Part 2. After the good results ...

Read Article
Kosti Kannas | 2020-05-20 10:46:12

Absolute Measurement, Part 2: Verifying the results

In my last blog post, we introduced the concept of Absolute Measurement and CAD programming the Mapvision Quality Gate visual inspection system. Before we get to the results with real production parts, we need to verify that the measured ...

Read Article
Mapvision Quality Gate system with an artefact
Kosti Kannas | 2020-05-06 09:56:48

Next: Mapvision Quality Gate Goes Absolute

Mapvision is about to change the game by introducing a new Mapvision Quality Gate unit which can measure absolute coordinates without any help from a CMM. And all of that with a software update!
Read Article
Joakim Siirilä | 2020-04-17 14:14:09

Managing Quality Remotely with Mapvision Quality Gate - 1

We live in a hyper-connected world where competitiveness is gained not only by economies of scale or removing waste in production lines but also by increasing the efficiency in communications and information flow across production systems, ...

Read Article
Mapvision | 2020-02-26 17:28:10

Improving The Measurement of Angles and Flatness

At Mapvision, we want to work with real-word quality control issues and solve everyday issues with our visual inspection data. That is why we always work in close cooperation with our customers in our product development. One issue some of our ...

Read Article
Mapvision | 2019-01-23 12:37:00

Mapvision Continues to Invest into Future – Core Technology Receives US Patent

Mapvision, a leading in-line inspection company based in Helsinki Finland, has been granted a patent by the United States Patent and Trademark Office. The patent – U.S. Patent No. 10,012,500 – relates to the Mapvision measurement technology, and ...

Read Article