Saper Sahbaz | 2020-08-31 09:17:40

Why You Need to Go Beyond Sampling and Statistical Process Controls (SPCs)

There were the days that a supplier with a defect rate of 1% – or in other words 10,000 parts per million (PPM) – would be considered a good supplier. However, with the improvements in production and quality control capabilities, the expectations ...

Read Article
Kosti Kannas | 2020-08-28 09:19:21

Welcome to the Post-CMM era!

This is part 4 of our blog series about Mapvision Absolute Measurement (if you missed the previous posts, you can find them here: Mapvision Quality Gate Goes Absolute, Verifying the results and Programming Mapvision Quality Gate with CAD ...

Read Article
Kosti Kannas | 2020-07-03 12:55:49

Programming Mapvision Quality Gate with CAD referencing

We continue our blog series about Absolute Measurement a.k.a. CAD referencing or CAD programming. You can read the earlier posts from this same blog: Mapvision Quality Gate Goes Absolute and Absolute Measurement, Part 2. After the good results ...

Read Article
Joakim Siirilä | 2020-05-18 10:11:44

Managing Quality Remotely with Mapvision Quality Gate - 2

As I previously discussed in a previous blog post, we live in a hyper-connected world where competitiveness is gained not only by economies of scale and removing waste but also by increasing the efficiency in communications and information flow ...

Read Article
Massimo Rovere | 2020-04-28 08:55:06

How to get your money back: Calculating the return on a Mapvision Quality Gate investment

While it is still unclear how severe an effect the current virus pandemic will have on the global economy, it is already clear that it has brought on additional challenges for everybody in the automotive industry. Luckily, there is a lot you can ...

Read Article
Joakim Siirilä | 2020-04-17 14:14:09

Managing Quality Remotely with Mapvision Quality Gate - 1

We live in a hyper-connected world where competitiveness is gained not only by economies of scale or removing waste in production lines but also by increasing the efficiency in communications and information flow across production systems, ...

Read Article
Matias Impivaara | 2020-01-16 17:40:01

Our Mission: To Visualize Quality

Ever since our company’s founders started their research on visual real-time industrial measurement in the seventies, and all through the development of our first fully digital 100% in-line inspection systems, we at Mapvision have had a strong ...

Read Article