Kosti Kannas | 2020-08-28 09:19:21

Welcome to the Post-CMM era!

This is part 4 of our blog series about Mapvision Absolute Measurement (if you missed the previous posts, you can find them here: Mapvision Quality Gate Goes Absolute, Verifying the results and Programming Mapvision Quality Gate with CAD ...

Read Article
Kosti Kannas | 2020-07-03 12:55:49

Programming Mapvision Quality Gate with CAD referencing

We continue our blog series about Absolute Measurement a.k.a. CAD referencing or CAD programming. You can read the earlier posts from this same blog: Mapvision Quality Gate Goes Absolute and Absolute Measurement, Part 2. After the good results ...

Read Article
Kosti Kannas | 2020-05-20 10:46:12

Absolute Measurement, Part 2: Verifying the results

In my last blog post, we introduced the concept of Absolute Measurement and CAD programming the Mapvision Quality Gate visual inspection system. Before we get to the results with real production parts, we need to verify that the measured ...

Read Article
Mapvision Quality Gate system with an artefact
Kosti Kannas | 2020-05-06 09:56:48

Next: Mapvision Quality Gate Goes Absolute

Mapvision is about to change the game by introducing a new Mapvision Quality Gate unit which can measure absolute coordinates without any help from a CMM. And all of that with a software update!
Read Article